Manual del editor visual

This page is a translated version of the page Help:VisualEditor/User guide and the translation is 21% complete.
PD Nota: Si tu modifica iste pagina, tu accepta de publicar tu contribution sub licentia CC0. Vide le paginas de adjuta sur le dominio public pro saper plus. PD


Aperir le editor visual

Pro modificar un pagina con le editor visual, preme sur le scheda "Modificar" in alto del pagina.

Le apertura del pagina pro su modification pote prender alcun secundas, o plus si le pagina es multo longe.

Un clic sur le scheda “Modificar fonte” aperira le editor de wikitexto classic.


Le editor visual pote tamben esser aperite con un clic sur le ligamine “modificar” in cata section.

Prime passos: le instrumentario del editor visual

Captura de schermo del instrumentario del editor visual
Le instrumentario del editor visual appare in alto del schermo quando tu comencia a modificar. Illo include alcun icones familiar:

Disfacer e Refacer le modificationes que tu ha facite.

Le menu disrolante Titulos: permitte cambiar le formato del paragrapho. Pro cambiar le stilo de un paragrapho, mitte le cursor in le paragrapho e selige un option in iste menu (non es necessari marcar alcun texto). Le titulos de section appare como “Titulo”, e le subsectiones es “Subtitulo 1”, “Subtitulo 2”, e assi successivemente. Le formato normal de texto es “Paragrapho”.

Formatation: Preme “A” pro aperir un menu.

  • Le option “Grasse” (B) pone le texto seligite in litteras grasse.
  • Le option “Italic” (I) pone le texto seligite in litteras italic.
  • Le option “Superscripto” (x2) rende le texto seligite plus micre que le resto del texto e legiermente elevate.
  • Le option “Subscripto” (x2) rende le texto seligite plus micre que le resto del texto e legiermente abassate.
  • Le option “Barrate” (S) adde un barra solide per le texto seligite.
  • Le option “Codice de computator” (un par de accolladas: {}) rende le texto seligite in un typo de litteras monospatial, distinguente lo del texto (in litteras proportional) que lo circumfere.
  • Le option “Sublinear” (U) adde un linea solide sub le texto seligite.
  • Le option “Lingua” (文A) permitte marcar le lingua (per exemplo, japonese) e le direction (per exemplo, de dextra a sinistra) del texto seligite.
  • Le option final (), que se appella “Remover”, remove tote le formatation de characteres del texto seligite, incluse le ligamines.

Si tu non ha seligite alcun texto, alora quando tu preme sur “A” pro aperir le menu, e alora selige un option, le formato seligite se applicara al texto que tu comencia a scriber, a partir de ubi se trova le cursor.


Utensile de ligamines: Le icone de catena es le utensile de ligamines. Premer sur illo (normalmente post haber seligite alcun texto) aperi le dialogo de ligamine.

Menu Citar: Le menu “Citar” es usate pro adder citationes integrate (appellate tamben “notas al pede del pagina” o “referentias”). Tote le projectos ha accesso al formatage basic de referentias e al possibilitate de reusar citationes per medio de iste menu.

Button Citar: Si le servicio Citoid e/o le utensile de citationes es activate sur tu wiki, tu videra un button Citar in loco de un menu Citar.

Sur VisualEditor/Citation tool se trova instructiones pro adder patronos local de citation al scheda “Manual” sur un wiki specific.

Sur le pagina Activar Citoid sur tu wiki se trova instructiones pro activar le scheda Automatic.

Le servicio Citoid essaya completar automaticamente le patronos de citation.


Listas e indentation: Le prime duo optiones permitte formatar texto como un “Lista a punctos” o un “Lista numerate”. Le ultime duo optiones permitte diminuer o augmentar le nivello de indentation del entratas de un lista.

Inserer: Le menu “Inserer” pote differer sur alcun projectos. Ecce un lista de tote le optiones que pote apparer.
  • Le icone "Imagines e multimedia" (un imagine de montanias) aperi le dialogo multimedial.
  • Le icone “Patrono” (un pecia de puzzle) permitte modificar patronos.
  • Le option “Tabella” permitte inserer un tabella.
  • Le option “Commento” (un ballon de discurso) permitte inserer commentos que non deveni visibile al lectores; iste commentos pote esser vidite solmente quando on es in modo de modification, ubi illos se indica per un icone de signo exclamative. In modo de modification, premer sur le icone de signo exclamative permitte modificar o deler le commento.
  • Le icone “Hieroglyphicos” (un symbolo ankh – ☥) permitte inserer hieroglyphicos. (Vide infra.)
  • Le option “Bloco de codice” permitte inserer codice.
  • Le option “Notation musical” permitte inserer un symbolos musical.
  • Le icone “Galeria” (un serie de photos) permitte inserer un galeria in le pagina.
  • Le icone “Formula mathematic” (Σ) aperi le fenestra pro inserer formulas.
  • Le option “Graphico” permitte inserer un graphico.
  • Le option “Tu signatura” permitte inserer un signatura que tu usa sur le projecto. Illo essera rendite gris (non seligibile) quando tu modifica un pagina de un typo (o “spatio de nomines "), como un articulo, ubi le signaturas non debe esser inserite.
  • Le icone “Lista de referentias” (tres libros) aperi un fenestra in le qual tu pote specificar ubi le referentias essera monstrate al lector. Isto debe normalmente esser facite solo un vice sur un pagina.

Insertion de characteres special: Le icone “Character special” (Ω) se trova al latere del menu “Inserer”. Quando premite, illo monstra un fenestra con multe characteres special. Premer sur un character specific lo insere in le texto. Iste characteres special include alcun symbolos standard, diacriticos, e symbolos mathematic. (Iste lista pote esser personalisate localmente. Vide VisualEditor/Special characters pro instructiones.)

Le button Avisos de modification monstra tote le avisos pro le pagina.

Le menu Optiones de pagina es a sinistra del button Publicar modificationes e del menu Cambiar de editor. Sur iste menu se trova un button pro aperir un fenestra Optiones con le sequente schedas (latere sinistre):
  • Categorias permitte adder categorias a iste pagina. Tamben permitte definir un altere indice de ordinamento pro adjustar le ordine de apparentia del pagina in un categoria.
  • Configuration de pagina permitte facer del pagina un redirection e adjustar le optiones de iste redirection, adjustar le parametros de apparentia del Tabula de Contento, disactivar le ligamines Modificar al latere de cata titulo, e definir le pagina como un pagina de disambiguation.
  • Configuration avantiate permitte adjustar le parametros concernente le incorporation del pagina in le indices de motores de recerca, le apparentia de un scheda pro adder un nove section, e le titulo monstrate.
  • Linguas monstra un lista de paginas in altere linguas que es ligate a ille pagina.
  • Patronos usate monstra un lista de ligamines a cata patrono usate sur iste pagina.

Le schedas del fenestra “Optiones” appare tamben in le menu “Optiones de pagina” e pote esser aperite con un clic sur illos. In ultra, le menu “Optiones de pagina” contine le optiones “Vider de sinistra a dextra” o “Vider de dextra a sinistra” e le option “Cercar e reimplaciar”, le qual aperi un barra ubi se pote inserer parolas o expressiones regular a cercar e reimplaciar, insimul a plure buttones pro optiones.


Le button Cambiar de editor se trova al latere del button Publicar modificationes. Illo permitte passar al editor de wikitexto.

Publicar modificationes

Quando tu ha finite de modificar, preme sur le button blau “Publicar modificationes” in le instrumentario. Si tu non ha facite modificationes, le button essera disactivate (monstrate in gris). Pro annullar tote le modificationes, claude le fenestra del navigator o preme sur le scheda “Leger” supra le instrumentario de modification.

Premer sur le button blau “Publicar modificationes…” aperi un fenestra que permitte inserer un curte summario de tu actiones, marcar le modification como minor, e adder le pagina a tu observatorio. Le quadro de summario es le equivalente del campo Summario: in le editor de wikitexto.

Tamben es possibile revider tu cambiamentos con le button “Revider tu modificationes” pro confirmar que illos functiona como previste ante de publicar le modificationes. Isto es similar al button “Detaliar modificationes” in le editor de wikitexto.

Le button “Reprender modification” te retorna al pagina que tu ha in modification. Tu pote publicar tote tu modificationes plus tarde.

Modificar ligamines

Links can be added through the "Ligamine" icon (links in a chain) in the toolbar, or by using the shortcut Ctrl+K (or ⌘ Command+K on a Mac).

If you select (highlight) text and then press the "Ligamine" button, that text will be used in creating the link. For a link that involves only one word, you can either select that word or just put the cursor within that word.


When you use either the button or the shortcut, a dialog will open in which you may type the link.

The link tool will try to help with internal links by searching for likely matches. Once you have entered or selected the link, you complete the linking process by pressing ↵ Enter or by pressing the "Finite" button. Your link will immediately appear on the page, but as with other changes to the page, it will not be published until you publish the entire page.


To link to a web page on another website, the process is similar: Choose the "Sito externe" tab, and enter a URL in the box.

External links without labels look like this: [1]. You can add these by placing your cursor away from any word (e.g., after a space). Open the link tool by pressing on the button or pressing the shortcut keys. Type the URL in the box, and press the "Finite" button to insert the link.

To change or remove an existing link, press within the text for that link, then press the "Ligamine" icon that appears near it. The dialog will appear, for editing. You can also get to the dialog with the Ctrl+K keyboard shortcut. When a link is selected, it appears as blue framed.

In the link editing dialog, you can then change where the link goes. You can also remove the link entirely by pressing the "Remover" button in the upper right corner of the dialog. You can also open the link's target in another window by pressing on the copy of the link in the dialog box. (You might want do this to check if an external link is valid.)

If you want to exit the link label (the text displayed as a link) or continue to write after this link, you can press :

  • Pressing it once will escape the link editing dialog and put your cursor at the end of the element linked (blue framed, to edit this element)
  • Pressing it twice will put the cursor after the element linked, ready to type the rest of your text.

To edit the link label of an existing link, press within the link label and type the new one. But if you want to replace the entire label, please note:

  • If you have selected (highlighted) the entire link label, the link will be deleted by typing any key.
  • To edit the link label directly without deleting it, put the cursor within that link label, use the backspace and delete keys (no more than necessary), and a narrow blue link area will remain there. Now you may type in the new label for the kept link.
  • You can also link to categories, files and more.

Editing references

For further information, see Help using citation templates or Help using citoid's Automatic tab

Determining which system is in place

Your wiki may use one of three footnote systems. The one shown on the right is the simplest system, where the "Citar" menu does not include any citation templates. If your wiki uses this system, then everything you need to know about footnotes is on this page.

In the second system, you again start by pressing the Citar button. Then a dialog box opens, which includes several popular citation templates set up for quick access in the "Manual" tab. If your wiki uses this system, then you will find more details at Help:VisualEditor/User guide/Citations-Templates

In the third system, you again start by pressing the Citar button. Then a dialog box opens, which includes an automatic citation process using the citoid service under the Automatic tab. If your wiki uses this system, you will find more details at Help:VisualEditor/User guide/Citations-Full

Editing an existing reference

To edit an existing reference, press on it where it appears in the text (usually as a bracketed number). You will see either a "Referentia" icon (bookmark) or an icon (and name) for the template that was used to create this reference. In either case, pressing on the "Modificar" button will open a dialog where you can edit the reference.

For the "Referentia" icon, pressing "Modificar" opens the reference dialog. To start changing the reference information, press on it.

Many wikis use templates to format references. If a template is used in your reference, then when you move your pointer over the reference information, all the information in that field will be highlighted.

If a template was used and you press on the reference information, then the Patrono icon (puzzle piece) will appear with some information. Press on the "Modificar" button to edit the content of the template in the template editor dialog.


If what appears when you press on a reference is an icon for a standard template for citations (an example is at right), then pressing "Modificar" will open the template editor dialog.

Inside the template editor, you can add or remove types of information or change current content. Only fields (template parameters) that have content will show, initially. To add fields, press on "Adder" at the bottom of the editor.

Press on "Applicar modificationes" when you are done.

Re-using an existing reference

If the page already contains a citation that applies to the text you want to source, then you can choose to re-use that existing citation.

To re-use an existing reference, place your cursor in the body of the text where you want to add a new reference (number) for that citation. Then press on the "Reusar" item from the "Citar" menu.

(Note: If your wiki has the second or third footnote system described above, you'll see a "Reusar" tab, in a dialog, instead of a "Reusar" item on the "Citar" menu.)


In the Referentia dialog, look at the list for the reference you want to reuse, and select it. If there are many references, you can use the search box (labeled "Cercar in le referentias actual") to list only those references that include certain text.

Adding a new reference

To add a citation using the "Citar" menu, place your cursor where you want to add it in the text. Then click "Basic".

Using the "Basic" citation

Shown here is what you will see if you select the basic references item. In the Reference editor, you can add your citation, including formatting.

You can make the reference belong to a given group, although normally this is left blank. (This option is used to display groups of references with the "Lista de referentias" tool.)


In the Reference dialog, if you want to include a citation template, or any other template, in your new reference, press the Patrono icon (puzzle piece) in the "Inserer" toolbar menu within the Reference editor.

Then, look for the template you want to use, add it and edit it as you would any other template. (See the Editing templates section, below, if you need more information about templates.)

After you are done editing your new template, press on "Applicar modificationes" to return to the Reference editor, and "Applicar modificationes" again to return to the page you are editing.


If there isn't already a list of references on the page (for example, if you are adding the first reference for the page), you need to specify where the list of references, and their text, will be displayed to the reader.

Place the cursor where you want to display the references list (usually at the bottom of the page), open the "Inserer" menu and press the "Lista de referentias" icon (three books).


If you are using several groups of references, which is relatively rare, you can specify the group in this dialog. Only the references that belong to that group will be displayed on the page at the location where you are placing the group.

The final step in the References list dialog is to press "Inserer".

Using standard cite templates

Your local wiki may have added extra citation templates to the "Citar" menu. If so, you have quick access to the most-used citation templates for your wiki. (Instructions for adding extra citation templates to your local wiki are available at VisualEditor/Citation tool .)

Pressing on a template icon such as "Cite book" will take you into the template editor for that template. Important information fields may be marked with an asterisk. While the most common fields will be shown, not all of them are required.

To add more parameters, scroll down in the template editor and press on the "Adder" option.

Press on "Inserer" when you are done.

Editing images and other media files

Editing images

To add a new image (or another type of media file) to the page, press the "Imagines e multimedia" icon (a picture of mountains) in the "Inserer" menu. The image will be added wherever your cursor is.

Pressing the "Imagines e multimedia" icon opens a dialog that automatically searches Wikimedia Commons and your local wiki for media files related to the title of the page you are editing.

You can change the search by changing the text in the dialog's search box.

To choose a file, press on its thumbnail image.

This places the image onto the page you are editing.


After the image you selected is inserted into the page, another dialog will open. This dialog allows you to add and edit the caption of the image. The caption can contain formatting and links.

The media dialog also allows you to add alternative text captions, to help users who use screen readers, or who have disabled image display.

You can also set various parameters for the image in the "Configuration avantiate" window. These include the alignment, the type, and size of the image.

When you are done, press "Applicar modificationes" to close the dialog and return to editing the page.

For an existing image, you can add or edit a caption or other settings by pressing on the image, then pressing on the "Imagines e multimedia" icon that appears below the picture.

You can resize an existing image by pressing on it, then moving the resize icon (the two-headed arrow on one or both bottom corners).

You can also drag and drop an image to a place higher or lower on the page.

Uploading images

You can upload images from a tab in the media dialog, or by dragging and dropping a file into the editor, or by pasting an image from your clipboard.

Press the "Incargar" tab and select an image from your computer. You can type the file name, or drag an image into the box. If you dragged and dropped an image directly into the editor, or pasted one from your clipboard, this tab will open automatically.

You need to describe the image and add categories to it so that other people can find it.

The image will be inserted into the page when you are done.

Editing media galleries

To add a new gallery, press the "Galeria" icon (a set of photos) on the "Inserer" menu. (If you don't see this icon on that menu, then your local wiki has decided to delay implementing this functionality in the visual editor.)

To edit an existing gallery in the visual editor, press that gallery. Then, near the bottom of the gallery, press the gallery icon (a set of photos). This brings up the gallery editor, with the full list of images included in the gallery.
The gallery editor is currently a simple box that allows you to edit existing galleries using wikitext markup. To add a new image to an existing gallery, type the file name, followed by a bar (|) and the caption for that image. You must put each image in the gallery on its own line. You can also edit this list to remove or rearrange images or to change captions.

When you press the "Finite" button, you will exit the gallery editor. You should then see your changes, with the gallery as it will now appear to readers.

Remember that exiting the gallery editor does not publish your changes. As with other changes made using the visual editor, you must publish the entire page in order to publish your work.

Editing templates

The powerful MediaWiki template system lets you insert dynamic content, text from other pages, and much more. For a detailed explanation and examples, see the Templates help page.

In the VisualEditor you can search for a relevant template, add an invocation or transclusion on the page you’re editing and, if needed, add custom content using parameters.

Insert new template

To add a template to a page, place your cursor at the position on the page where you want the template to be inserted. Then open the Inserer menu and select " Patrono". Alternatively, type two curly brackets {{ to open the same dialog.
Find the template you want to insert by typing either its name or a relevant keyword. Results containing the search term in either the name or description will display in a dropdown. This should help you find a relevant template, even if you don’t know its exact name.

If you’re having trouble finding the kind of template you want by using keywords, you can look on other wiki pages with similar content and view or edit the page source to see which templates are in use. When you find the desired template’s name, you can type it into this field to insert it here.

Screenshot of the template search field in the Visual Editor

You can also edit a template that’s already on a page. When you select the template you want to edit, it turns blue, and a box appears displaying " Patrono". Then select the "Modificar" link or double click on the template itself to open the template.
Screenshot of the VisualEditor interface with a template selected

Some templates are not visible to someone reading a page. In the visual editor, such hidden templates are still shown so that you can click and edit or delete them. The name of the template will be shown next to the puzzle icon and both will be grayed out.
Screenshot of hidden templates in the Visual Editor interface

Template parameters

You’ll see this dialog box when you’re adding a new template or editing one already in place. What you see in the box depends on whether the template in question contains TemplateData , helpful metadata added by other editors to make it easier to edit templates in the Visual Editor.

When a template contains TemplateData, the VisualEditor can use it to present annotated fields for you to fill in.


For templates that have some community-provided TemplateData, the VisualEditor displays a list of the named parameters and, often, descriptions and instructions explaining the meaning and required format for each parameter’s values.

Screenshot of template parameters in the Visual Editor interface
Template parameters in the Visual Editor interface

You can disable any optional parameter (which have blue checkboxes on the left side). If a parameter’s checkbox is grayed out and not clickable, the template requires that parameter, so it can’t be disabled.

When you insert a new template, you may find that some optional parameters are pre-selected. That means the author(s) of the template recommends the use of those parameters. It’s best to review all parameters that will be used in a template to ensure you understand their use.

Clicking an unchecked parameter adds it to the template. Clicking a parameter that’s already been added takes you to the parameter’s input field.

Some template parameters will show as “deprecated”. Don’t use deprecated parameters when inserting a template; they’re only visible to you because those parameters are in use on older pages where this template was included.

Screenshot of template parameters in the Visual Editor interface
Interface for adding more parameters to a template in the VisualEditor

Adding undocumented parameters

If you’re inserting or editing a template whose author hasn’t laid out its parameters in TemplateData, it has what we call “undocumented” or “unnamed parameters”. In these cases, you should consult the page for the template itself. There you can learn how to correctly employ and work with all of the template’s parameters. This includes learning the exact names of the parameters as written by the template author.

If you find in the documentation that the template expects parameters without names, fill in numbers as placeholders for the parameter names using the undocumented parameter input, then add text to the values you want to provide as you normally would.

Example:

  • first unnamed parameter: “1”
  • first unnamed parameter’s value: “en_US”
  • second unnamed parameter: “2”
  • second unnamed parameter’s value: “yes”

If you accidentally include nonexistent, misspelled or erroneous parameters, the values you enter for those parameters won’t show up on the page you’re editing.

Screenshot of a template missing TemplateData
Template without TemplateData in the Visual Editor

Autogenerated parameters

In this example, the template in question lacks TemplateData but it was possible to autogenerate the parameters. This means that the undocumented parameters have already been added for you, but the names may not be easily understandable and the dialog cannot display any directions or descriptions. As a result the dialog box provides a link to the template’s documentation, which should help you deduce and fill in the template’s various parameters.

Editing multi-part template content

During editing, you may open template content consisting of multiple templates or a single template linked to some wikitext. This differs from the nested templates described below. In this case, the templates are better visualized as being stacked or connected.

This content often contains “unbalanced templates,” templates which are incomplete on their own and need to be paired with some wikitext or another template in order to function.

These related pieces of template content must be created in wikitext, but can be edited in the VisualEditor. In these cases you will see a notice at the top of the dialog to signal the situation and a specialized toolbar will be visible at the bottom of the sidebar. There you can use the icon buttons to add additional templates, additional wikitext, delete elements or change their order.

Screenshot of the interface to edit multi-part template content in the VisualEditor
Editing multi-part template content in the VisualEditor

Nested templates

Templates can include other templates as the value for parameters. You’ll recognize it when you see a parameter whose value contains the double curly braces ( {{ }} ) denoting a template.

The VisualEditor can’t present this template within a template (a nested template) using the editor’s easy-to-use interface, so if you want to nest a template yourself, you’ll need to understand how to add the template by hand in wikitext into the appropriate parameter field.

Screenshot of the VisualEditor template interface showing an embedded template
Embedded template in the VisualEditor

Completing your edit

When you have finished editing a template, you can click "Applicar modificationes". Then you can preview your edit and make sure it looks the way you want and expect.

You may also see an error message, which (like the other TemplateData mentioned above) is community-provided content and may vary in usefulness. You may need to consult the template’s own documentation to get to the bottom of some errors. If you’re still having trouble, consider posting about your problem on the template’s talk page.


Removing a template

To remove a template in the VisualEditor, click the template box. Press the "Delete" or "Backspace" key on your keyboard. The template will disappear from the page.
Screenshot of the button to remove a template
Removing a template in the VisualEditor

Editing on mobile

When editing a template on a page using the VisualEditor on a mobile device, you’ll see that the sidebar starts out hidden. You can make it visible by pressing the “Show/hide options” button.
Screenshot of editing a template on a mobile device
Editing a template on mobile in the VisualEditor

Substituting templates

When you insert a template in a wiki page, its content and appearance are reevaluated every time the page loads, based on the template code and the values of its parameters. This means if someone updates the code of a template, then every page which uses that template will also get updated when they publish.

There’s another, much less common way to use templates, though, and that’s to substitute a template. Doing this permanently includes the template content just as it appears at the moment you insert it. It will not update if the template code is later changed.

Most users won’t ever need to resort to substitution. Substitution is typically only useful when you need to capture the exact appearance of one version of a template, such as when content is under development and needs evaluation.

To substitute a template in the VisualEditor, insert a template using the name syntax subst:<template name>. Then press the blue “Adder” button.

When you’re finished, press “Inserer”, which will insert the template content as you see it.

Screenshot of editor using SUBST to add a template
Adding a template using SUBST in the VisualEditor

Editing lists

You can use the visual editor to create lists, or to change the format of an existing list. There are two types of lists: unordered (bullet) and ordered (numbered).

To start a new list, just press on one of the two menu items shown here. Or, if you already have typed the list (on separate lines), select (highlight) the list you have typed, then press on one of the menu items.


Shown here are examples of the two types of lists: unordered (bullet) and ordered (numbered).

If you want to change the indentation level of part of an existing list, select the part of the list that you want to change.

Then use the menu, or press the Tab key. (The Tab key increases indentation; use the shift key plus the Tab key to decrease indentation)

Here is the result of increased indentation.

You can even mix ordered (numbered) and unordered (bullet) lists, if the list items have different indentations.

Editing tables

You can use the visual editor to insert and change tables.

You can even import a table by dragging a comma-separated value (.csv) file from your computer into the main editing window.


When you press on "Table", in the "Inserer" menu, the visual editor inserts a blank four-by-four table.

Now the "Table" menu is available. From that menu, you can add a caption to the top of the table.


To select a cell, press it once.

To edit the contents of the cell (for example, to add content or to correct a spelling error), double press in the cell. Or you can select the cell and then press Return.

To end your editing of a cell, just press elsewhere.


You can add, move or delete a column or a row.

You can merge cells: Select them, then from the Table menu, press on "Merge cells".

If you merge cells, only the text in one cell is kept; any text in the other cells is deleted when you merge the cells. If you decide that you wanted some or all of the text that was deleted, use the Undo button, move or copy the text you want, then merge the cells again.

You can also split cells that were previously merged. All the content that was in the merged cell will remain in the first cell when you do the split. You can then cut and paste text to other cells, if you want.

Editing categories

To edit categories, on the "Optiones de pagina" menu, press the "Categorias" item.

Pressing on "Categorias" opens a dialog that lists existing categories and allows you to add new ones, and to delete existing categories.

You also have the option of setting or changing the general (default) sorting key, which determines where the page appears when listed with other pages in the same category.

For example, the default sorting key for the article "George Washington" is "Washington, George". In the category "Presidents of the United States", the article is listed under the letter "W", not the letter "G".


To add a category for a page, type the name of the category into the field "Adder un categoria". As you type, the visual editor will search for possible matching, existing categories. You can either select an existing category, or you can add a category that doesn't yet have its own category page. (Until that category page is created, your new category will show as a red link after you publish all your editing changes.)

To remove an existing category, press on it and press on the "Remover" icon (trash can) in the dialog that opens.

Pressing on a category also allows you to specify a sorting key for that specific category. Such a sorting key overrides the default sorting key.


Press "Applicar modificationes" when you are done editing categories to return to the page editor.

Editing page settings

To edit a page's settings, press to open the "Optiones de pagina" menu, in the toolbar, and select the "Configuration de pagina" button.

The "Configuration de pagina" button opens a dialog that shows several options.

You can make a page a redirect to another page by checking the "Rediriger iste pagina verso" checkbox, and then typing the name of the page to which you want to send the reader who tries to go to the page that you are editing.

At the bottom is the option to prevent page renames from updating this redirect. This is very rarely used.


You can change whether the page shows a Table of Contents by selecting one of these three buttons. The default option is "Si necessari", which shows a Table of Contents if there are three or more headings.

You can make a page not show edit links next to each section header by checking this checkbox.

Press "Applicar modificationes" when you are done editing the Optiones de pagina to return to the page editor.

Editing maps

You can add and change maps. See Help:VisualEditor/Maps .

Editing mathematical formulae

To add a new mathematical formula to the page, place your cursor where you want it to be inserted, and press on the "Formula mathematic" icon ("Σ") in the "Inserer" menu on the toolbar.

A window will open in which you can type the formula, using LaTeX syntax. the visual editor will update the formula as you type it, so you can see how it will look as you make changes. Once you are happy with the formula, press the "Inserer" button.

To edit an existing mathematical formula on the page, press on it and then press on the "Σ" icon that appears. This will open up the formula window, where you make changes.

Mathematical formulae can be placed inline or centered as a block.

Editing musical scores

To add a new musical notation to a page, place your cursor where you want the musical notation to be inserted. Then, from the "Insert" menu on the toolbar, press the "Musical notation" option.

To edit an existing musical notation on the page, double press on it.


This will open the "Musical notation" dialog. Here the notation can be edited by scale, either in ABC or in Lilypond format. You can also link the notation to an audio or MIDI file. Once you are finished, press the "Done" button to close the dialog and publish your changes.

Editing poems and other special items

Some items, such as association lists and poems, are not yet fully supported by the visual editor.

In most cases, the existing items can be edited, but new ones cannot be inserted in the visual editor.

Until they are fully supported, you can copy an existing one from another page, or edit the source wikitext directly.


Switching between the visual and wikitext editors

To switch from the visual editor to the wikitext editor, press the [[ ]] button on the far right of the toolbar.


You'll see a diff. (If you pressed on "Abandonar modificationes", you'll just see wikitext, ready to edit with the wikitext editor.)

Scroll down, and you'll see the wikitext editing area.


You can also switch from the wikitext editor to the visual editor. To do that, press the pencil icon on the far right of the toolbar.

Keyboard shortcuts

Many editors are used to entering wikitext directly, especially bold, italics and wikilinks. Keyboard shortcuts allow to quickly apply formatting without having to use toolbar items. Here are some of the most common shortcuts in the visual editor:

PC shortcut Action Mac shortcut

Ctrl+B Bold ⌘ Cmd+B

Ctrl+I Italics ⌘ Cmd+I

Ctrl+K Insert link ⌘ Cmd+K

Ctrl+X Cut ⌘ Cmd+X

Ctrl+C Copy ⌘ Cmd+C

Ctrl+V Paste ⌘ Cmd+V

Ctrl+Z Undo ⌘ Cmd+Z

Also see the full list of all keyboard shortcuts .