Manual:Pywikibot/coordinate import.py

This page is a translated version of the page Manual:Pywikibot/coordinate import.py and the translation is 8% complete.

Wikimedia Git repository has this file: scripts/coordinate_import.py

coordinate_import.py is a Pywikibot script used to mass import coordinates from Wikipedia to Wikidata .

Usage

$ python pwb.py coordinate_import -lang:en -family:wikipedia -cat:Category:Coordinates_not_on_Wikidata

This will work on all pages in the category "coordinates not on Wikidata" and will import the coordinates on these pages to Wikidata.

The data from the "GeoData" extension is used so that extension has to be setup properly. On Wikimedia wikis GeoData extension is installed. You can look at the Special:Nearby page on your local Wiki to see if it's populated.

The extension adds coordinates to the API. Coordinate import bot uses that information to add a claim to Wikidata. By default P625 (coordinate location) is used.

In the future the bot might support other properties as long as the property is of type globe-coordinate.

Syntax

You can use any typical pagegenerator to provide with a list of pages:

$ python pwb.py coordinate_import <some generator>

$ python pwb.py coordinate_import -lang:it -family:wikipedia -namespace:0 -transcludes:Infobox_stazione_ferroviaria

You can also run over a set of items on the repo without coordinates and try to import them from any connected page. To do this, you have to explicitly provide the site using -lang and -family arguments. Example:

$ python pwb.py coordinate_import -lang:wikidata -family:wikidata -namespace:0 -querypage:Deadendpages

The following command line parameters are supported:

Parameter	Description
`-create`	Create items for pages without one

Argumentos globais disponíveis

Estas opções irão substituir a configuração em user-config.py .

OPÇÕES GLOBAIS
Parâmetro	DESCRIÇÃO	Variável de configuração
`-dir:Localização`	Leia os dados de configuração do 'bot' da pasta dada pelo PATH, em vez da pasta predefinida.
`-config:O ficheiro é um ficheiro`	O nome do ficheiro de configuração do utilizador. Default is user-config.py.	`user-config.py`
`-lang:xx`	Configure a língua do wiki em que deseja trabalhar, sobrepondo- se à configuração em user-config.py. $XX deve ser o código da linguagem.	`mylang`
`-family:xyz`	Set the family of the wiki you want to work on, e.g. wikipedia, wiktionary, wikitravel, ... Isto irá substituir a configuração em user-config.py.	`family`
`-user:xyz`	Liga- se como utilizador 'xyz' em vez do utilizador por omissão.	`usernames`
`-daemonize:xyz`	Devolve imediatamente o controlo ao terminal e redirecciona o stdout e o stderr para o ficheiro xyz. (Utilizar apenas para bots que não requeiram entrada do stdin).
`-help`	Mostra o texto da ajuda.
`-log`	Active o ficheiro de registo, usando o nome do ficheiro 'script_ name -bot.log', os registos serão guardados na sub- pasta dos registos.	`log`
`-log:xyz`	Activa o ficheiro de registo, usando o 'xyz' como o nome do ficheiro.	`logfilename`
`-nolog`	Desactiva o ficheiro de registo (se estiver activo por omissão).
`-maxlag`	Define um novo parâmetro de 'maxlag' para um número de segundos. Adiar as emissões durante os períodos de atraso no servidor de bases de dados. O valor por omissão é config.py	`maxlag`
`-putthrottle:n` `-pt:n` `-put_throttle:n`	Define o tempo mínimo (em segundos) que o robô irá esperar entre as páginas de gravação.	`put_throttle`
`-debug:item` `-debug`	Active o ficheiro de registo e inclua dados extensivos de depuração para o componente "item" (para todos os componentes, se for usado o segundo formulário).	`debug_log`
`-verbose` `-v`	Faça com que o bot forneça um resultado adicional de consola que possa ser útil na depuração.	`verbose_output`
`-cosmeticchanges` `-cc`	Activa ou desactiva a opção cosmetic_changes feita em config.py ou user-config.py para o inverso e sobrepõe- a. Todas as outras configurações e restrições estão intocadas.	`cosmetic_changes`
`-simulate`	Desactiva a gravação no servidor. Útil para o teste e depuração de um novo código (se indicado, não faz nenhumas mudanças reais, mas apenas mostra o que teria sido alterado).	`simulate`
`-<Há aqui um config.>:n`	Poderá usar todas as variáveis de configuração numérica como opção e modificá- la com a linha de comandos.

Generators and filters available

Generator options
Parameter	Description
`-cat`	Work on all pages which are in a specific category. Argument can also be given as "-cat:categoryname" or as "-cat:categoryname\|fromtitle" (using # instead of \| is also allowed in this one and the following)
`-catr`	Like -cat, but also recursively includes pages in subcategories, sub-subcategories etc. of the given category. Argument can also be given as "-catr:categoryname" or as "-catr:categoryname\|fromtitle".
`-subcats`	Work on all subcategories of a specific category. Argument can also be given as "-subcats:categoryname" or as "-subcats:categoryname\|fromtitle".
`-subcatsr`	Like -subcats, but also includes sub-subcategories etc. of the given category. Argument can also be given as "-subcatsr:categoryname" or as "-subcatsr:categoryname\|fromtitle".
`-uncat`	Work on all pages which are not categorised.
`-uncatcat`	Work on all categories which are not categorised.
`-uncatfiles`	Work on all files which are not categorised.
`-file`	Read a list of pages to treat from the named text file. Page titles in the file may be either enclosed with brackets (example: `[[Page]]`), or be separated by new lines. Argument can also be given as "-file:filename".
`-filelinks`	Work on all pages that use a certain image/media file. Argument can also be given as "-filelinks:filename".
`-search`	Work on all pages that are found in a MediaWiki search across all namespaces .
`-logevents`	Work on articles that were on a specified Special:Log. The value may be a comma separated list of these values: logevent,username,start,end or for backward compatibility: logevent,username,total To use the default value, use an empty string. You have options for every type of logs given by the log event parameter which could be one of the following: spamblacklist, titleblacklist, gblblock, renameuser, globalauth, gblrights, gblrename, abusefilter, massmessage, thanks, usermerge, block, protect, rights, delete, upload, move, import, patrol, merge, suppress, tag, managetags, contentmodel, review, stable, timedmediahandler, newusers It uses the default number of pages 10. Examples: -logevents:move gives pages from move log (usually redirects) -logevents:delete,,20 gives 20 pages from deletion log -logevents:protect,Usr gives pages from protect by user Usr -logevents:patrol,Usr,20 gives 20 patroled pages by Usr -logevents:upload,,20121231,20100101 gives upload pages in the 2010s, 2011s, and 2012s -logevents:review,,20121231 gives review pages since the beginning till the 31 Dec 2012 -logevents:review,Usr,20121231 gives review pages by user Usr since the beginning till the 31 Dec 2012 In some cases it must be given as `-logevents:"move,Usr,20"`
`-interwiki`	Work on the given page and all equivalent pages in other languages. This can, for example, be used to fight multi-site spamming. Attention: this will cause the bot to modify pages on several wiki sites, this is not well tested, so check your edits!
`-links`	Work on all pages that are linked from a certain page. Argument can also be given as "-links:linkingpagetitle".
`-liverecentchanges`	Work on pages from the live recent changes feed. If used as -liverecentchanges:x, work on x recent changes.
`-imagesused`	Work on all images that contained on a certain page. Can also be given as "-imagesused:linkingpagetitle".
`-newimages`	Work on the most recent new images. If given as -newimages:x, will work on x newest images.
`-newpages`	Work on the most recent new pages. If given as -newpages:x, will work on x newest pages.
`-recentchanges`	Work on the pages with the most recent changes. If given as `-recentchanges:x`, will work on the x most recently changed pages. If given as `-recentchanges:offset,duration` it will work on pages changed from 'offset' minutes with 'duration' minutes of timespan. Examples: `-recentchanges:20` - gives the 20 most recently changed pages `-recentchanges:120,70` - will give pages with 120 offset minutes and 70 minutes of timespan `-recentchanges:visualeditor,10` - gives the 10 most recently changed pages marked with 'visualeditor' `-recentchanges:"mobile edit,60,35"` - will retrieve pages marked with 'mobile edit' for the given offset and timespan rctags are supported, and the rctag must be the very first parameter part.
`-unconnectedpages`	Work on the most recent unconnected pages to the Wikibase repository. Given as -unconnectedpages:x, will work on the x most recent unconnected pages.
`-ref`	Work on all pages that link to a certain page. Argument can also be given as "-ref:referredpagetitle".
`-start`	Specifies that the robot should go alphabetically through all pages on the home wiki, starting at the named page. Argument can also be given as "-start:pagetitle". You can also include a namespace. For example, "-start:Template:!" will make the bot work on all pages in the template namespace. default value is start:!
`-prefixindex`	Work on pages commencing with a common prefix.
`-transcludes`	Work on all pages that use a certain template. Argument can also be given as "-transcludes:Title".
`-unusedfiles`	Work on all description pages of images/media files that are not used anywhere. Argument can be given as "-unusedfiles:n" where n is the maximum number of articles to work on.
`-lonelypages`	Work on all articles that are not linked from any other article. Argument can be given as "-lonelypages:n" where n is the maximum number of articles to work on.
`-unwatched`	Work on all articles that are not watched by anyone. Argument can be given as "-unwatched:n" where n is the maximum number of articles to work on.
`-property:name`	Work on all pages with a given property name from Special:PagesWithProp.
`-usercontribs`	Work on all articles that were edited by a certain user. (Example : -usercontribs:DumZiBoT)
`-weblink`	Work on all articles that contain an external link to a given URL; may be given as "-weblink:url"
`-withoutinterwiki`	Work on all pages that don't have interlanguage links. Argument can be given as "-withoutinterwiki:n" where n is the total to fetch.
`-mysqlquery`	Takes a Mysql query string like "SELECT page_namespace, page_title, FROM page WHERE page_namespace = 0" and works on the resulting pages. See Manual:Pywikibot/MySQL .
`-sparql`	Takes a SPARQL SELECT query string including ?item and works on the resulting pages.
`-sparqlendpoint`	Specify SPARQL endpoint URL (optional). (Example : -sparqlendpoint:http://myserver.com/sparql)
`-searchitem`	Takes a search string and works on Wikibase pages that contain it. Argument can be given as "-searchitem:text", where text is the string to look for, or "-searchitem:lang:text", where lang is the language to search items in.
`-random`	Work on random pages returned by Special:Random. Can also be given as "-random:n" where n is the number of pages to be returned.
`-randomredirect`	Work on random redirect pages returned by Special:RandomRedirect. Can also be given as "-randomredirect:n" where n is the number of pages to be returned.
`-google`	Work on all pages that are found in a Google search. You need a Google Web API license key. Note that Google doesn't give out license keys anymore. See google_key in config.py for instructions. Argument can also be given as "-google:searchstring".
`-yahoo`	Work on all pages that are found in a Yahoo search. Depends on python module pYsearch. See yahoo_appid in config.py for instructions.
`-page`	Work on a single page. Argument can also be given as "-page:pagetitle", and supplied multiple times for multiple pages.
`-pageid`	Work on a single pageid. Argument can also be given as "-pageid:pageid1,pageid2,." or "-pageid:'pageid1\|pageid2\|..'" and supplied multiple times for multiple pages.
`-linter`	Work on pages that contains lint errors. Extension Linter must be available on the site. -linter select all categories. -linter:high, -linter:medium or -linter:low select all categories for that prio. Single categories can be selected with commas as in -linter:cat1,cat2,cat3 Adding '/int' identifies Lint ID to start querying from: e.g. -linter:high/10000 -linter:show just shows available categories.

Filter options
Parameter	Description
`-catfilter`	Filter the page generator to only yield pages in the specified category. See -cat generator for argument format.
`-grep`	A regular expression that needs to match the article otherwise the page won't be returned. Multiple -grep:regexpr can be provided and the page will be returned if content is matched by any of the regexpr provided. Case insensitive regular expressions will be used and dot matches any character, including a newline.
`-grepnot`	Like -grep, but return the page only if the regular expression does not match.
`-intersect`	Work on the intersection of all the provided generators.
`-limit`	When used with any other argument -limit:n specifies a set of pages, work on no more than n pages in total.
`-namespaces` `-namespace` `-ns`	Filter the page generator to only yield pages in the specified namespaces. Separate multiple namespace numbers or names with commas. Examples: -ns:0,2,4 -ns:Help,MediaWiki You may use a preleading "not" to exclude the namespace. Examples: -ns:not:2,3 -ns:not:Help,File If used with -newpages/-random/-randomredirect/-linter generators, -namespace/-ns must be provided before -newpages/-random/-randomredirect/-linter. If used with -recentchanges generator, efficiency is improved if -namespace is provided before -recentchanges. If used with -start generator, -namespace/-ns shall contain only one value.
`-onlyif`	A claim the page needs to contain, otherwise the item won't be returned. The format is property=value,qualifier=value. Multiple (or none) qualifiers can be passed, separated by commas. Examples: `P1=Q2` (property P1 must contain value Q2) `P3=Q4,P5=Q6,P6=Q7` (property P3 with value Q4 and qualifiers: P5 with value Q6 and P6 with value Q7) Value can be page ID, coordinate in format: latitude,longitude[,precision] (all values are in decimal degrees), year, or plain string. The argument can be provided multiple times and the item page will be returned only if all claims are present. Argument can be also given as "`-onlyif:expression`".
`-onlyifnot`	A claim the page must not contain, otherwise the item won't be returned. For usage and examples, see `-onlyif` above.
`-ql`	Filter pages based on page quality. This is only applicable if contentmodel equals 'proofread-page', otherwise has no effects. Valid values are in range 0-4. Multiple values can be comma-separated.
`-subpage`	-subpage:n filters pages to only those that have depth n i.e. a depth of 0 filters out all pages that are subpages, and a depth of 1 filters out all pages that are subpages of subpages.
`-titleregex`	A regular expression that needs to match the article title otherwise the page won't be returned. Multiple -titleregex:regexpr can be provided and the page will be returned if title is matched by any of the regexpr provided. Case insensitive regular expressions will be used and dot matches any character.
`-titleregexnot`	Like `-titleregex`, but return the page only if the regular expression does not match.