Extension talk:Replace Text/Archive 2012 to 2014

Feature request

Heiya, I would be cool if one would be able to add an additional reason for the replacement action taken to be shown in the log than just "Text replace - ...". Being able to localise "Text replace" would be another small wish. Cheers --[[kgh]] 21:48, 15 February 2012 (UTC)Reply

Pipe and Regex fails

Just a note, might be a bug: Using a pipe symbol | in the search field in conjunction with regular expressions leads to following error message: Es ist ein Datenbankfehler aufgetreten. Der Grund kann ein Programmierfehler sein. Die letzte Datenbankabfrage lautete: (SQL-Abfrage versteckt) aus der Funktion „ReplaceText::doSearchQuery“. Die Datenbank meldete den Fehler „1139: Got error 'empty (sub)expression' from regexp (localhost)“.

Since I have a lot of SMW queries using the pipe, I came accross this. Anyway, I can of course search for patterns leaving out the |

--Francishunger (talk) 23:54, 22 March 2012 (UTC)Reply

I suppose that's because the pipe isn't part of the MySQL regex syntax, see http://dev.mysql.com/doc/refman/5.1/en/regexp.html for details. EDIT: Should have read through that page ... the pipe symbol should be recognized. --Nakohdo (talk) 07:25, 23 March 2012 (UTC)Reply

Regex to batch move pages to new namespace fails [OPEN]

I'd like to batch move pages in category 'Person' from MAIN namespace to custom namespace 'PERSON'.

My setup

  • MW: 1.16.x
  • MySQL: 5.1.41-3ubuntu12.10
  • Replace Text: 0.9.3

My Replace Text settings:

  • Original text: (.*)
  • Replacement text: Person:$1
  • [x] Use regular expressions
  • Search in namespaces: [x] (Main)
  • Replace only in category: Person
  • [x] Replace text in page titles, when possible

As a result I get messed page titles, e.g. a page Alex will be renamed to Person:APerson:Person:lPerson:Person:ePerson:Person:xPerson:

When changing the original text to A(.*) and the replacement text to Person:A$1 everything works as expected, moving all pages starting with letter A to the new namespace. Is this a bug or did I miss something?

--Planetenxin (talk) 07:42, 7 May 2012 (UTC)Reply

I'm not sure you can move namespaces like this as namespaces are treated differently than normal page titles. See http://www.mediawiki.org/wiki/Manual:Using_custom_namespaces for further pointers. hth --Nakohdo (talk) 14:16, 7 May 2012 (UTC)Reply

Can't even replace one single word after 7 hours

I read that the extension can't replace all words immediately. So I decided to wait and go to bed. But when I checked 7 hours later, not a single word has been replaced.

What would be the problem? My website hasn't yet been known to anyone except me and very few people who I personally know, so the traffic is very small. Is this the source of the problem?

If this problem can't be solved, how can I stop and cancel this wiki job?

You can manually perform all jobs waiting in the jobs queue by running RunJobs.php (link for directions) --FreedomFighterSparrow (talk) 13:50, 12 June 2012 (UTC)Reply
Running a cron job regulary for /maintenance/runJobs.php --type replacetext. --Subfader (talk) 10:28, 16 June 2012 (UTC)Reply
I found that the type replacetext dosn't work for me. Instead replaceText works. However, it seems like that these jobs are not executed if I run the job queue without explicitly specifying this type. LambdaB (talk) 14:20, 3 January 2013 (UTC)Reply

A way to undo?

Is there a way to undo changes? Or do a mass revert?

If not, can this be a request :D

Unfortunately, there's no way to do that. Maybe this should be filed under the need for a tool to do mass reverts of all the edits (or all the latest edits) by one user - there's no way to do that in general, and that would be useful in dealing with spam as well. Yaron Koren (talk) 01:43, 17 July 2012 (UTC)Reply
I should note, though, that this script might be helpful until there's a true solution. Yaron Koren (talk) 12:54, 17 July 2012 (UTC)Reply

Won't Work

I cannot get this to work. It keeps saying No pages were found containing the string "(whatever I searched for)". I know that the string I am searching for is on at least one page. --Zackmann08 (talk) 16:52, 27 July 2012 (UTC)Reply

Hi - does it literally say that for any search string you type in? And by any chance, are you putting quotes in the search string? You shouldn't do that. Yaron Koren (talk) 16:58, 27 July 2012 (UTC)Reply
If I search for the word hello (so no quotes), it says No pages were found containing the string "hello". --Zackmann08 (talk) 20:37, 27 July 2012 (UTC)Reply
I assume that you have at least one page containing "hello"? Note also that the search is case-sensitive. What about just searching for a single letter? Yaron Koren (talk) 20:45, 27 July 2012 (UTC)Reply
When I search for a single letter it works. --Zackmann08 (talk) 23:00, 28 July 2012 (UTC)Reply

I can't get this to work either .. when I search for a word using the normal search I get like 30 pages containing the word (file name inside the pages), when I try to use the replace text to find this exact word and replace it I get the No pages were found containing the string ZJeFo 01:44, 11 Dec 2012 (KSA)

Are you looking in the right namespace(s), and is the capitalization exactly correct? Yaron Koren (talk) 05:09, 11 December 2012 (UTC)Reply
Yes I am, as I mentioned above, if I use normal search I get more than 30 results of what I am looking for .. If I use the same word I was searching for in the replace text extension I get No pages were found containing the string ZJeFo 20:57, 17 Dec 2012 (KSA)
As before, I don't know how much I can really help, with this set of information. Does the Replace Text search ever work? And if so, can you figure out what's different between when it works and when it fails? Yaron Koren (talk) 00:21, 18 December 2012 (UTC)Reply

Append Text

Since this expansion already allows to select pages in very nice ways, I would love to mis-use it to append some text to the page instead of replace it.

You could just rule if "Original text" is empty, the "Replacement text" will be appended to all pages.--VolkoV (talk) 10:17, 6 August 2012 (UTC)Reply

You could also use a hook to display text below eahc articles. --Subfader (talk) 11:20, 6 August 2012 (UTC)Reply
I know, but if I want to change a lot of existing articles, this won't help.--VolkoV (talk) 11:27, 6 August 2012 (UTC)Reply

Empty "Original text" isn't allowed, it doesn't work. I want to add categories to all new files without a category. New uploaded files are empty, so it is impossible to replace something. Or is there another extension like add something to selected articles? Couldn't find something usable. Thanks a lot. --Tom Jac (talk) 07:22, 4 September 2013 (UTC)Reply

I'm glad an empty original text doesn't work, because that seems like it would be a recipe for disaster... you could try using regular expressions, and have a search text of ".*" and a replacement text of "$1 ABC"... that too might be a recipe for disaster, but maybe it would work. Yaron Koren (talk) 13:19, 4 September 2013 (UTC)Reply
Dangerous... But it finds all sites. After a careful manual selection it works. But is it possible to eliminate the non empty sites with a specific text (f.i. "[[category:") with a regular expression before? ".{0}" doesn't work... Sorry I'm not very familiarly with regular expressions. Thanks a lot --Tom Jac (talk) 17:39, 4 September 2013 (UTC)Reply
Sure - you could probably do something like "(.*Category:AAA.*)" for the search text. Yaron Koren (talk) 19:18, 4 September 2013 (UTC)Reply
Sorry (for my stupidity) but I couldn't get it. What is the search expression for something what is _not_ inside the site? All old sites have "Category:". So I could select all empty new ones. Thanks a lot. --Tom Jac (talk) 14:33, 17 September 2013 (UTC)Reply
Oh, oops - I misunderstood your earlier question. Unfortunately, I can't think of a way to do that... Yaron Koren (talk) 15:05, 17 September 2013 (UTC)Reply
How about "?!" for "not followed by" f.i. ".*(\[\[Category\:(?!Picture)\]\])" (perl, 'negative look-ahead assertion') for all sites without the category "Picture"? But it doesn't work. Thanks a lot --194.94.134.90 15:48, 15 October 2013 (UTC)Reply

Regular Expressions

I'm not seeing any "Use regular expressions" on the ReplaceText page. Is there some file that needs to be configured for this option to appear? Or is it just an outdated version of the extension... Hylian King ZW (talk) 13:48, 17 August 2012 (UTC)Reply

I assume it's the latter. Looking at the version history, it looks like that feature was added in version 0.9. Yaron Koren (talk) 14:05, 17 August 2012 (UTC)Reply
Alright, thanks for humoring a new sysop who is still fairly clueless about the inner workings of MediaWiki. Hylian King ZW (talk) 14:40, 17 August 2012 (UTC)Reply

Edits only by a Special Bot

How can i make it, that the Edits of this extensions was make vom from a Bot and not from the User who gives the Task to Start? 178.2.136.195 06:48, 8 November 2012 (UTC)Reply

Unfortunately, it's not possible to have a bot do it, because Replace Text doesn't offer an API action. But I think you can make it appear that a bot did it, by logging in as that bot and doing the replacement. Yaron Koren (talk) 13:40, 8 November 2012 (UTC)Reply
I hardcoded that into the extsnion cos I also think it's more useful this way. Maybe think of implenting a variable setting for it like $wgReplaceTextUser. --Subfader (talk) 14:46, 16 November 2012 (UTC)Reply
I agree. When I do a large replace operation on 10,000+ pages, it dominates the recent changes for days or weeks. Right now, I'm just logging in as a bot user to do the replace operation as Yaron suggested, but it would be handy if ReplaceText could be assigned a specific user in some cases. I don't want to do that in every case, so instead of a variable setting, it would be better if a check box could be selected to indicate the replace should be done as another bot user. Badon (talk) 23:21, 22 January 2013 (UTC)Reply
The bot account concept works fine for larger jobs, and keeps the edits to one user and with the bot flag, RC is not effected. Mlpearc (powwow) 18:50, 8 April 2013 (UTC)Reply
Another option is to have a message on the page when the number of edits reaches a limit to suggest to the user to switch to a bot account --Skunark (talk) 06:02, 12 June 2014 (UTC)Reply

Error on runJobs when $wgCacheDirectory is set

I run maintenance/runJobs.php --type replacetext regulary but when I set $wgCacheDirectory I get the error:

Unable to open DB file for write "/tmp/cacheMsg/l10n_cache-en.cdb"
Backtrace:
#0 includes/Cdb.php(62): CdbWriter_DBA->__construct('/tmp/cacheMsg/l...')
#1 includes/LocalisationCache.php(883): CdbWriter::open('/tmp/cacheMsg/l...')
#2 includes/LocalisationCache.php(613): LCStore_CDB->startWrite('en')
#3 includes/LocalisationCache.php(352): LocalisationCache->recache('en')
#4 includes/LocalisationCache.php(262): LocalisationCache->initLanguage('en')
#5 includes/LocalisationCache.php(205): LocalisationCache->loadItem('en', 'magicWords')
#6 languages/Language.php(1946): LocalisationCache->getItem('en', 'magicWords')
#7 languages/Language.php(1960): Language->getMagicWords()
#8 [internal function]: Language->getMagic(Object(MagicWord))
#9 includes/StubObject.php(58): call_user_func_array(Array, Array)
#10 includes/StubObject.php(121): StubObject->_call('getMagic', Array)
#11 [internal function]: StubContLang->__call('getMagic', Array)
#12 includes/MagicWord.php(259): StubContLang->getMagic(Object(MagicWord))
#13 includes/MagicWord.php(197): MagicWord->load('rmatch')
#14 includes/parser/Parser.php(4289): MagicWord::get('rmatch')
#15 extensions/RegexFunctions/RegexFunctions.php(49): Parser->setFunctionHook('rmatch', Array)
#16 [internal function]: wfRegexFunctions()
#17 includes/Setup.php(370): call_user_func('wfRegexFunction...')
#18 maintenance/doMaintenance.php(86): require_once('/var/www/vhosts...')
#19 maintenance/runJobs.php(103): require_once('/var/www/vhosts...')
#20 {main}

Can this be fixed? MW 1.16a and ReplaceText 0.9.1 here but that shouldn't matter. Cheers. --Subfader (talk) 13:34, 24 November 2012 (UTC)Reply

I have no idea. Does this happen only for Replace Text jobs, do you know? Yaron Koren (talk) 16:03, 25 November 2012 (UTC)Reply
You're right, not only for RT. Wrong place here. https://bugzilla.wikimedia.org/show_bug.cgi?id=42437 --Subfader (talk) 20:59, 25 November 2012 (UTC)Reply


XML Error

I get the following error when accessing the special page

Fatal error: Call to undefined method Xml::hidden() in C:\xampp\htdocs\wiki\extensions\ReplaceText\SpecialReplaceText.php on line 228

MediaWiki 1.18.1
PHP 5.3.8 (apache2handler)
MySQL 5.5.16

Luke 28 November 2012

I think you're just using an old version of Replace Text. Yaron Koren (talk) 14:26, 28 November 2012 (UTC)Reply
You appear to be correct, i downloaded what i thought was the latest from "download snapshot" - I downloaded the latest SpecialReplaceText.php from the git and the problem is resolved. Many Thanks - Luke 28 November 2012

Page Schemas issue (+2 features requests)

Hi!

It doesn't seem to work inside Page Schemas' XML in category pages. Category pages containing search string don't come up at all in search results if the string is inside Page Schemas' XML. Other pages with the same string show up normally. Also if the search string is not inside XML, category page shows up normally in search results.

Feature request 1: I know that categories are irremovable by nature because of the inability of MediaWiki to replace all references to them inside pages content. But since Replace Text is the tool that does exactly that, wouldn't it be nice to be able to rename categories too somehow? i.e. by deleting them and copy their content to new ones? Even with extra warnings like "All the history of this caterory will be lost"?

Feature request 2 (Easy one, I might try to do it myself when I fully understand the development process): I would like to see replacement string as well in search results. Something like this (search string: less, replacement string: more):

...imagination is lessmore important than knowledge...

or even better

...imagination is lessmore important than knowledge...

--Ioannis Protonotarios MW 1.19.3│PHP 5.3.19│MySQL 5.1.66│SMW 1.7.1│SRF 1.7.1│SF 2.5.2 alpha│SFI 0.6│PS 0.3.1│RT 0.9.5 18:11, 31 December 2012 (UTC) Happy New Year!

Additional filters

Is there a hope for being able in the future to filter the pages to target not only by categories, but also by Concepts for people who use semantic mediawiki ?

I doubt it... that would only be helpful in a small set of circumstances, I think. One thing you can do, if you want to simulate that behavior, is to temporarily add the pages that would be in that concept to a new category, using #ifeq to match on the relevant properties or template fields. Yaron Koren (talk) 14:11, 21 January 2013 (UTC)Reply

Doesn't work for russian characters

Very nice and useful extension! Used it lots of times but for some reason it doesn't work for Russian characters (for example here ru.wikioffuture.org) If I search any word containing Russian characters (like награда) nothing will be found. Any advice would be greatly appreciated! --79.116.9.48 15:13, 16 May 2013 (UTC)Reply

Thanks! That's too bad - my guess is that it's the SQL query that's failing. Could the issue be with the MySQL encoding? Yaron Koren (talk) 17:38, 16 May 2013 (UTC)Reply
Thanks so much for your prompt reply Yaron! The DB character set is "utf8 -- UTF-8 Unicode" and collation is "utf8_general_ci". Should I change it :)
Hm - I don't know; utf8 sounds right. Sorry, I really don't know much about this encoding/non-ASCII thing. Yaron Koren (talk) 02:12, 17 May 2013 (UTC)Reply
Hi, there is the following situation. Trying to replace <ys4w /> to {{Соцссылки}}. All pages found and selected. But replacement happened only for 3 pages. Any ideas? Ektip (talk) 10:05, 1 June 2013 (UTC)Reply
That's strange. Maybe the rest of the replacement "jobs" just haven't run yet? Yaron Koren (talk) 15:38, 2 June 2013 (UTC)Reply
I had the same idea, and was waitng for several minutes, but it does not work. It also does not depend on what characters i replace Latin or Cyrilic. I did several iterations to replace the text of 40 pages. Sometimes it repaced on 4-5 pages, sometimes only for 1 page. When 8 pages left script did not replece any more. Ektip (talk) 06:14, 4 June 2013 (UTC)Reply

Replace in Templates

I want to change a lot of articles wich use the template "men". Here is one example for the call of template "men":

{{men
 |name=Schuster
 |age=24years
}}


After Replacetext this should be the result:

{{person
 |name=Schuster
 |firstname=
 |age=24years
}}

In Replacetext I marked "regular expression" and searched for:

{{men
 |name=(.*)
 |age=(.*)
}}

... and wanted to replace with:

{{person
 |name=$1
 |firstname=
 |age=$2
}}

Sadly it's not working :-( --87.186.34.168 20:26, 14 September 2013 (UTC)Reply

I am sorry ... I tried it another time and now it works :-) I don't not why. I don't delete this topic - maybe someone else needs the solution. --87.186.34.168 20:30, 14 September 2013 (UTC)Reply
I think you shold use escape characters,
Replace
\{\{men
 \|name=(.*)
 \|age=(.*)
\}\}
with
{{person
 |name=$1
 |firstname=
 |age=$2
}}

WARNING: Extension Poses Security Risks

Usage of this extension has been known to pose SEVERE SECURITY RISKS on sites that only use the default settings. Security measures for special page extensions should be used to prevent unauthorized usage which may lead to site and or server hijacking. The extension has vulnerabilities in various areas, including the usage of globals, PHP and MySQL database classes.

Note: Typical passwords will not prevent a breach against your site(s) if this extension is used.

It is strongly suggested that users of the extension refrain until an official version resolving the vulnerability is released; if usage is continued without resolution, then editing variables and re-declaring functions is suggested. Do not leave extension exposed on special page, if so, any user on the site will be able to change bulk content. Do not use if local settings have been leaked online; you may need to re-install the entire MediaWiki application if so. --Habatchii (talk) 02:59, 1 October 2013 (UTC)Reply

That sounds serious indeed. For what it's worth, by default only administrators have access to Special:ReplaceText, which I would think would lessen the risk considerably. In any case, do you know of specific text that can be entered into the "replace text" form that would cause problems? Feel free to respond either here, or by emailing me at yaron57 -at- gmail.com. Yaron Koren (talk) 03:49, 1 October 2013 (UTC)Reply

With all due respects, the extension is a valuable addition to MediaWiki; but my installation(s) have been under attack while using it. Apparently; the issue is URL related and suspected SQL injection directly into the string being parsed. The hack must have gained access and either changed specific text/strings or created a function to override the string whenever it was executed.
No rollback or previous information is ever recorded in the recent changes report. The first version of the works replaced are still in the searches and some in all pages, but the links lead to the affected pages. History information on such pages is empty, if the pages existed after the replace.
Recovery and downtime has increased tremendously since the attacks which appears to be targeting namespace variables. My suggestion would be to include a non-global option that can isolate URL/SQL execution as well as 'undoing by reason' to trigger an auto-debug report. Comments?

--Habatchii (talk) 07:02, 1 October 2013 (UTC)Reply

How do you know that these attacks are being done via Replace Text? Yaron Koren (talk) 12:15, 1 October 2013 (UTC)Reply

I have tested a locked patch (wiki) on a single server and minimized all other possible security threats. This extension is the single point of contact between the test negative and test positive output; no other extension was disabled during the safe period and enabled during the attack. It certainly was not a mechanical error of the parser, it was a genuine vulnerability attack.

--Habatchii (talk) 21:06, 1 October 2013 (UTC)Reply

Is Special:ReplaceText restricted to admins on your wiki? If so, how are hackers able to use it? Also, the way you phrase things makes it a little difficult to understand. What are "namespace variables"? What do you mean by "The first version of the works replaced"? What's an "auto-debug report"? Yaron Koren (talk) 21:22, 1 October 2013 (UTC)Reply
The extension was down (disabled) for a week. I brought it online for 2 minutes to change 4 pages and up to 10 other pages (template pages with links) were affected.(Note: It is a dummy test site so no other users are registered. Dummies host possible SQL and other vulnerable extensions without affecting the larger networks.)
Namespace variables are the individual parser variables that maintain a site's (wiki) namespaces. A list of such variables may be located on the official MediaWiki website.
First version refers to text before being replaced. Your extension has volumes of references on how the replace text feature works.
This notice is only to alert the original author of the extension that the extension has a major security issue that may affect corporate and or government clients that use it.
In evaluating this case, it appears that the hack is an organized group. Their objectives seem to be narrow at present but security issues are on their agenda. I would strongly encourage a peer review of this extension to reinforce the existing security already installed on the MediaWiki release and any third party tracking that may develop when in use. Perhaps tracing per users and reporting any suspicious IP address occurrences that do not match the authorized IP addresses.

--Habatchii (talk) 01:48, 2 October 2013 (UTC)Reply

Thanks for the info. So let me see if I understand: you ran Replace Text in order to change text in 4 pages, but after you ran it 10 other pages also had their text changed - and you believe that hackers were responsible for the changes to those 10 other pages? If that's correct, did the hackers do anything else, or was it just those 10 pages? Yaron Koren (talk) 03:00, 2 October 2013 (UTC)Reply

I will be launching a similar extension using the mainframe provided by the MediaWiki API. As a footnote to this issue, there are still extensible vulnerabilities with the Replace Text extension. I would also suggest that you change the name to a lessor profile name (i.e: PageGator or TextGator, etc.) Regardless if you have already implemented the suggested changes and or are currently monitoring usage statistics, you should be seriously prepared for peer review and general moderation of all aforementioned issues.

--Habatchii (talk) 04:50, 2 October 2013 (UTC)Reply

Well, again, I don't really understand what you're saying. If you ever feel like talking about this further, especially providing clearer information on the symptoms you've seen, that would be appreciated. Also, good luck with your extension. Yaron Koren (talk) 12:38, 2 October 2013 (UTC)Reply

MediaWiki 1.22 and newer do not execute jobs

Mediawiki: 1.23alpha php: 5.5.6

I installed extensions, enter special pages and tried to replace a simple word with another one. The extension found it on the page and said it's done but when I enter to the changed page, Nothing changed. — Preceding unsigned comment added by Omidh (talkcontribs)

I assume it's due to jobs; see the first item here. Yaron Koren (talk) 13:41, 29 November 2013 (UTC)Reply
I see the same issue. ReplaceText is a curent git checkout (December 10th 2013), MediaWiki is 1.22. I used basically the same checkout with MediaWiki 1.21 before and it worked correctly there. (The only changes in ReplaceText are some changed translations.)
When I click the "Do the replacement" button, then the jobs are not executed. I checked the database table "jobs" and I see the jobs from ReplaceText there. Their jobs_attempts field is 0, meaning MediaWiki did not try a single time to execute them and they also are not executed over time. And now I am clueless. What to do? --88.130.94.193 15:02, 15 December 2013 (UTC)Reply
Did you try running runJobs.php? I don't know why sometimes jobs aren't executed - it might be a memory issue. Yaron Koren (talk) 15:09, 15 December 2013 (UTC)Reply
Executing runJobs.php does run the jobs; the problem is not specific to Replace Text. However, it is reproducable for me that during normal page requests jobs are just not executed. That still worked correctly in MW 1.21. --88.130.94.193 15:16, 15 December 2013 (UTC)Reply
That has actually happened to me too, with MW 1.22... somehow I never made the connection to the MediaWiki version. Maybe this is a known bug in MW 1.22... if so, I hope it'll get fixed in time for the next version. I just added a note about it to the "Known issues" section in the documentation. Yaron Koren (talk) 03:26, 17 December 2013 (UTC)Reply
I filed that as https://bugzilla.wikimedia.org/show_bug.cgi?id=58719. Ideas are welcome! --88.130.81.165 01:11, 20 December 2013 (UTC)Reply
It seems that MW 1.22.5 was patched to solve this problem, however the jobs related to the ReplaceText extension are still not executed on my wiki, unless I run runJobs.php. Anyone else experiencing the same problem? --Choralia (talk) 09:46, 21 April 2014 (UTC)Reply
For example, see here https://bugzilla.wikimedia.org/show_bug.cgi?id=60698 and the bugs listed in this commit message https://gerrit.wikimedia.org/r/#/c/113038/ . I haven't tested yet, if it really solves the problem. --Wikinaut (talk) 17:01, 18 April 2014 (UTC)Reply
It doesn't on my wiki: ReplaceText does nothing until I run runJobs.php :( --Choralia (talk) 09:46, 21 April 2014 (UTC)Reply
MediaWiki 1.22 has a lot of problems with the on-request job queue. See Manual:Job queue#Changes introduced in MediaWiki 1.22. You can try to set $wgPhpCli = false; in LocalSettings.php, which should use the old way of executing jobs in 1.21 and earlier, and see if that works. --Ciencia Al Poder (talk) 10:10, 19 April 2014 (UTC)Reply
Setting $wgPhpCli = false; works, however it looks like a workaround rather than a solution. I'm afraid that this may trigger some undesired side effects on other functions and extensions. Any clue? --Choralia (talk) 09:46, 21 April 2014 (UTC)Reply
Yes, it is a workaround (as explained on the manual page). In 1.23 those problems should be fixed, but unfortunately, those fixes weren't backported to 1.22. --Ciencia Al Poder (talk) 09:26, 22 April 2014 (UTC)Reply
Still not working on MW 1.23.0. The $wgPhpCli = false; workaround doesn't work either. Very disappointed :( --Choralia (talk) 14:01, 11 June 2014 (UTC)Reply

Does calling runJobs.php work for you, after the upgrade? Yaron Koren (talk) 18:06, 11 June 2014 (UTC)Reply

Note that the $wgPhpCli = false; trick does not work in 1.23. Apparently, problems in 1.23 should be gone now, since the behavior was changed. See Manual:Job queue. --Ciencia Al Poder (talk) 19:06, 11 June 2014 (UTC)Reply
Yes, running runJobs.php manually works fine. Another strange effect, maybe totally uncorrelated to this problem (AJAX issue?), is that suggestions in the search box are not provided any more. --Choralia (talk) 08:15, 12 June 2014 (UTC)Reply
Addendum: I've been able to make it work by setting $wgRunJobsAsync = false; in LocalSettings.php. However, I guess it should also work if $wgRunJobsAsync is set to the default value. I hope this helps. --Choralia (talk) 15:52, 13 June 2014 (UTC)Reply
Very strange! This is starting to seem very much like a core MediaWiki issue. But that workaround is good to know about. Yaron Koren (talk) 16:25, 13 June 2014 (UTC)Reply
The call to the cron API apparently fails. This is the code fragment in includes/Wiki.php currently under my investigation:
if ( !preg_match( '#^HTTP/\d\.\d 202 #', $status ) ) {
    wfDebugLog( 'runJobs', "Failed to start cron API: received '$status'\n" );
}
This test is true, and $status gets the value "HTTP/1.1 401 Authorization Required". So, the call to the cron API seems to fail due to some authorization being required. What authorization is required to call the cron API? I'm on a shared server. Going to investigate further... --Choralia (talk) 12:51, 19 June 2014 (UTC)Reply
Got it. My test wiki runs in a password-protected directory to prevent that it is indexed by crawlers. The cron API does not inherit the user's authorization, so it cannot access the directory. I temporarily removed the password protection, and jobs were correctly run. My "live" wiki is public so there wouldn't be any real problem. However, some corporate wikis run under protected directories, so I guess that this problem should be corrected --Choralia (talk) 13:24, 19 June 2014 (UTC)Reply
Set $wgRunJobsAsync to false in LocalSettings.php to solve this issue. See more details in Manual:Job queue. You can also change the configuration so requests from localhost don't require authentication: [1] --Ciencia Al Poder (talk) 20:00, 19 June 2014 (UTC)Reply

Problem apparently solved in MW 1.24.0. No need to set $wgRunJobsAsync to false any more. --Choralia (talk) 15:50, 18 December 2014 (UTC)Reply

Yes, I thought that was the case, but it's good to get confirmation. Yaron Koren (talk) 16:18, 18 December 2014 (UTC)Reply

runJobs.php hangs on replaceText jobs (MW 1.22.0)

I'm having the opposite problem from the others with job issues. In my case, the replaceText jobs are run automatically by MediaWiki when I set $wgJobRunRate to a non-zero value, as expected. However, I prefer to use runJobs.php for performance reasons. On my server, runJobs.php hangs when it gets to the first replaceText job. It pops the job off the queue, as evidenced by jobs_attempts increasing to 1, but the script then hangs. Turning on profiling and the debug log shows that the two SQL calls by runJobs to pop the job occur, but nothing happens after that.

My setup is MW 1.22.0 with Replace Text's head revision, running on PHP 5.5, IIS 8.5, and Windows Server 2012 R2 against MySQL 5.6. If it's helpful, I have an older MW (1.20.2) installation on basically the same stack that I can use to try to isolate the issue if desired. --69.174.87.60 21:24, 20 January 2014 (UTC)Reply

That's strange. Sure, could you try doing the same thing on the MW 1.20 installation? Yaron Koren (talk) 21:29, 20 January 2014 (UTC)Reply
1.20.2 doesn't exhibit the same behavior -- it works as expected (both runJobs.php and the normal job runs on page loads work fine). The only difference between the two wikis in terms of extensions is that the 1.20.2 wiki has the Extension:Vector loaded (obsolete in 1.22), and the 1.22.0 wiki has Extension:PDF Handler and Extension:PDFEmbed loaded. --66.162.23.2 20:51, 24 January 2014 (UTC)Reply

add text after the first paragraph

I would like to add a <Tag> after the first paragraph on every page in my wiki with the MAIN Namespace. Is is possible to specify this condition in this extension?

It seems doubtful... I can think of a way to add some text after every paragraph, but not after only the first paragraph. Yaron Koren (talk) 13:21, 25 March 2014 (UTC)Reply

NOT in multiple categories

I would like to use this terrific extension to select a specific namespace AND NOT in three categories. The extension currently has the option 'Replace only in category:' for one category. How do I change the code to NOT select that category AND enable MULTIPLE options. Thanks --LTech (talk) 09:48, 2 June 2014 (UTC)Reply

Sorry, I don't know... hopefully it's not hard to do. Yaron Koren (talk) 14:32, 2 June 2014 (UTC)Reply
I worked on the code and managed to get it to do what I need. However after calling
		$jobs[] = new ReplaceTextJob( $title, $replacement_params );
		Job::batchInsert( $jobs );</code>
::I am getting the DATABASE ERROR:
<pre>A database query syntax error has occurred. This may indicate a bug in the software. The last attempted database query ::was:
(SQL query hidden)
from within function ‘RecentChange::save.’ Database returned error ‘1048: Column 'rc_comment' cannot be null (localhost).’
Do you know where this is being called? How can I debug this?
--LTech (talk) 18:07, 9 June 2014 (UTC)Reply
I don't know; I guess I'd have to see your code. Yaron Koren (talk) 21:15, 9 June 2014 (UTC)Reply
Adding $replacement_params['edit_summary']= 'example reason'; fixed this. --LTech (talk) 10:15, 10 June 2014 (UTC)Reply

Not working on whole words - Character encoding problem?

The extension won't match any whole words. MW 1.22.7, PHP 5.3.10, MySQL 5.5.34, English Language, LocalSettings.php has $wgLanguageCode = "en";
When I try to replace 'and' with 'the' (no quotes) it says "No pages were found containing the string "and".".
When I try to replace a single letter, for example replace 'e' with 'f', I get results that look like this: Argentina - ...� %'���Ly�&��>}.߹b��i2Q�. (Argentina is the page name) So I'm guessing it's a character encoding problem. Does anyone know how I can fix this? I've never changed any MW settings about character encoding from the defaults. Thanks -Dangrec (talk) 17:39, 5 June 2014 (UTC)Reply

Does this paragraph apply to your installation? If your revisions are compressed (that is, if $wgCompressRevisions is enabled in LocalSettings.php or the script compressOld.php has been executed with the option -t gzip) then ReplaceText will not work, because it makes use of SQL queries that can't search compressed text. --Ciencia Al Poder (talk) 19:45, 5 June 2014 (UTC)Reply
Ahhh, yes it does. I didn't realize $wgCompressRevisions is set to true in my LocalSettings. Hmm, that's a pain. I will try to find another way. Thanks very much! -Dangrec (talk) 19:54, 5 June 2014 (UTC)Reply

A couple of suggestions/wishlist options for this extension

First thanks for the extension, for what ever reason, special characters of just page titles and filenames got out of whack on a wiki, and this was a easy fix. My suggestions come after the fact that lots of pages are 'watched' and they get email updated per major edit.

  1. Option to mark the renames as minor edits so folks watching the pages won't be emailed per page/title
  2. Option to just disable emails on anything that was replaced, renamed, etc..

Thanks

--Skunark (talk) 02:18, 7 June 2014 (UTC)Reply
I don't know if the first one is possible... can you mark a page move as a minor edit? For the second one, it seems out of the scope of Replace Text; that seems like just a MediaWiki settings issue. Yaron Koren (talk) 12:37, 8 June 2014 (UTC)Reply
Well, that's not a move, but an edit. You can certainly mark edits as minor. Apart from that, it seems it's already marking those edits as minor: Every page's replacements shows up as a (minor) wiki edit. To disable emails entirely, they may need to be marked as a "bot" edit. I dunno if temporary adding the user that's performing the replacement to the bot group would do the job. --Ciencia Al Poder (talk) 14:29, 8 June 2014 (UTC)Reply
The poster was asking specifically about moves, i.e. renames, as far as I can tell. Yaron Koren (talk) 23:19, 8 June 2014 (UTC)Reply
Oh, sorry, I wasn't aware that this extension allowed mass-renames (page moves) --Ciencia Al Poder (talk) 09:22, 10 June 2014 (UTC)Reply
I figured out that the Replace Text extension uses the default preference settings for minor edits, so that was an easy change, but as I already mentioned, really should be a checkbox like any other page edit. This would resolve the email issue, but it's probably better to have a checkbox on that as well. Another thought is to recommend a bot account over sysop (or any other user group) or have the extension warn the account isn't a bot, again just some thoughts. The extension works great, but I only mention this as mass emails from any source is a good way to have your domain flagged as spam. A better option is for MW to coalesce the watch list emails to perhaps hourly or nightly.
With all the page renames I had to do, I went from an unknown editor to one of the top 15 in a matter of minutes, so I believe using a bot account or marking the edit in the same fashion as a bot edit would have been ideal. I'm not even sure if there is a way for me to flush my recent rise to fame on my meager wiki. Thanks again, though, you saved us from thousands of edits that we would have write several scripts to go repair! I'm on to addressing categories with special characters, luckily there's only a few hundred vs several thousands --Skunark (talk) 06:02, 12 June 2014 (UTC)Reply

replaces only the SECOND occurrence of the $target_str

How would I adjust the code:

$new_text = preg_replace( '/'.$target_str.'/U', $replacement_str, $article_text, 1, $num_matches );

so it replaces only the SECOND occurrence of the $target_str? --LTech (talk) 09:41, 10 June 2014 (UTC)Reply

A quick web search reveals this. Yaron Koren (talk) 21:38, 10 June 2014 (UTC)Reply
This code is the solution --LTech (talk) 09:33, 15 June 2014 (UTC)Reply

German MediaWiki Version 1.22.6

After instllation the extension does not show up on Spezialseiten(SpecialPages).--[[User:Bmrberlin| Bernd M.]] (talk) 10:41, 27 July 2014 (UTC)Reply


You must select at least one namespace

After Update of MediaWiki 1.23.2 Replace Text 0.9.7 ( | System Version I get now the Error "You must select at least one namespace"

The program lists all correctly to changing article. It is ask whether these items are to be changed. After the confirmation is red displayed: "You must select at least one namespace"

Regardless of whether only click a namespace or all, I get the same error

No different to change: $wgRunJobsAsync and $wgPhpCli

This Extention is extrem importent for me! Any Idea whats wrong??

Bastor (talk)

There was a change that was just merged in earlier this week, to try to take care of that exact problem. Could you get the latest code from Git and see if that fixes things? Yaron Koren (talk) 21:27, 22 August 2014 (UTC)Reply
After Update to grit version 1.0 (eb819cd) is running! Thanks for helps!!

Bastor (talk)

Suspress recentchanges entry

I'd like to see a checkbox to supress writing the edits to the recentchanges table.

I had to make 500.000 minor edits, and then Extension:Patroller and Extension:Newest Pages got super slow because they use the recentchanges table.

Is there a way to do such a thing? And are there any other extensions/scripts/bots that do it? Yaron Koren (talk) 01:35, 30 October 2014 (UTC)Reply
I guess not. After an IRC chat I hacked myself into RecentChange.php > notifyEdit() to ignore my bot edits
if( $uText != "MyBotName" ) {
 $rc->save();
}
I added a request for that: https://phabricator.wikimedia.org/T1290 Let's keep it independet from ReplaceText :) --Subfader (talk) 18:18, 16 November 2014 (UTC)Reply
Return to "Replace Text/Archive 2012 to 2014" page.